- R1에서 10.4.0.0/10.6.0.0대역으로는 EIGRP 100 으로 광고 및 IP Summary(10.5.0.0/16)사용(이외 네트워크 미사용)
- 이외 모든 라우터(R1 포함) 및 L3SW에서 RIP로 광고
- ESW1 ~ 9는 L3SW, 나머지 ESW는 L2SW
- 빨강 : vlan 10, 파랑 : vlan 20, 초록 : vlan 30, 보라 : vlan 40
- 위의 랩을 하나의 기준으로 10.3.0.0/16 ~ 10.7.0.0/16까지 링 토폴로지로 구성
R1
더보기
더보기
R1 sh run
Building configuration...
Current configuration : 2234 bytes
!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
!
!
voice dsp waitstate 0
!
!
!
!
!
!
!
!
!
!
!
!
!
memory-size iomem 0
archive
log config
hidekeys
!
!
!
!
!
ip tcp synwait-time 5
!
!
!
!
interface FastEthernet0/0
ip address 10.4.1.2 255.255.255.0
ip summary-address eigrp 100 10.5.0.0 255.255.255.0 5
ip summary-address eigrp 100 10.5.0.0 255.255.0.0 5
duplex half
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.10 multipoint
ip address 10.5.1.1 255.255.255.0
no ip split-horizon eigrp 100
no ip split-horizon
snmp trap link-status
frame-relay map ip 10.5.1.3 103 broadcast
frame-relay map ip 10.5.1.2 102 broadcast
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
interface Ethernet2/0
ip address 10.5.0.1 255.255.255.0
ip summary-address eigrp 100 10.5.0.0 255.255.255.0 5
ip summary-address eigrp 100 10.5.0.0 255.255.0.0 5
duplex half
!
interface Ethernet2/1
no ip address
shutdown
duplex half
!
interface Ethernet2/2
no ip address
shutdown
duplex half
!
interface Ethernet2/3
no ip address
shutdown
duplex half
!
router eigrp 100
redistribute rip metric 1544 200 255 1 1000
network 10.4.1.0 0.0.0.255
network 10.5.0.0 0.0.0.255
no auto-summary
!
router rip
version 2
redistribute eigrp 100 metric 5
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
no cdp log mismatch duplex
!
!
!
!
!
!
!
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line vty 0 4
login
!
end
R1 sh ip pro
Routing Protocol is "eigrp 100"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 100, rip
EIGRP NSF-aware route hold timer is 240s
Automatic network summarization is not in effect
Address Summarization:
10.5.0.0/24 for FastEthernet0/0, Ethernet2/0
10.5.0.0/16 for Ethernet2/0, FastEthernet0/0
Summarizing with metric 281600
Maximum path: 4
Routing for Networks:
10.4.1.0/24
10.5.0.0/24
Routing Information Sources:
Gateway Distance Last Update
(this router) 90 03:37:39
10.5.0.2 90 00:00:23
10.4.1.1 90 00:00:23
Distance: internal 90 external 170
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 26 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: eigrp 100, rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Serial1/0.10 2 2
Ethernet2/0 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.1.2 120 00:00:06
10.5.1.3 120 00:00:11
Distance: (default is 120)
R1 sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 88 subnets, 2 masks
D EX 10.7.13.0/24 [170/2223616] via 10.5.0.2, 00:38:21, Ethernet2/0
R 10.5.15.0/24 [120/2] via 10.5.1.2, 00:00:06, Serial1/0.10
D EX 10.4.14.0/24 [170/2223616] via 10.5.0.2, 00:00:23, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:00:23, FastEthernet0/0
D EX 10.3.9.0/24 [170/1737216] via 10.5.0.2, 02:18:30, Ethernet2/0
D EX 10.7.12.0/24 [170/2223616] via 10.5.0.2, 00:38:21, Ethernet2/0
D EX 10.6.13.0/24 [170/2226176] via 10.4.1.1, 00:00:24, FastEthernet0/0
R 10.5.14.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.15.0/24 [170/2223616] via 10.5.0.2, 00:00:52, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:00:52, FastEthernet0/0
D EX 10.3.8.0/24 [170/1737216] via 10.5.0.2, 02:18:30, Ethernet2/0
D EX 10.7.15.0/24 [170/2223616] via 10.5.0.2, 00:33:18, Ethernet2/0
R 10.5.13.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.12.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
D EX 10.3.11.0/24 [170/1737216] via 10.5.0.2, 02:01:34, Ethernet2/0
D EX 10.7.14.0/24 [170/2223616] via 10.5.0.2, 00:33:18, Ethernet2/0
R 10.5.12.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.13.0/24 [170/2223616] via 10.5.0.2, 00:00:45, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:00:45, FastEthernet0/0
D EX 10.3.10.0/24 [170/1737216] via 10.5.0.2, 02:18:30, Ethernet2/0
D EX 10.7.9.0/24 [170/2223616] via 10.5.0.2, 00:38:21, Ethernet2/0
D EX 10.6.8.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
R 10.5.11.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.10.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:01:16, FastEthernet0/0
D EX 10.3.13.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
D EX 10.7.8.0/24 [170/2223616] via 10.5.0.2, 00:38:21, Ethernet2/0
D EX 10.6.9.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
R 10.5.10.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.11.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
D EX 10.3.12.0/24 [170/1737216] via 10.5.0.2, 02:01:34, Ethernet2/0
D EX 10.7.11.0/24 [170/2223616] via 10.5.0.2, 00:35:45, Ethernet2/0
D EX 10.6.10.0/24 [170/2226176] via 10.4.1.1, 00:01:16, FastEthernet0/0
R 10.5.9.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.8.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:01:16, FastEthernet0/0
D EX 10.7.10.0/24 [170/2223616] via 10.5.0.2, 00:36:07, Ethernet2/0
R 10.5.8.0/24 [120/1] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.9.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:01:16, FastEthernet0/0
D EX 10.7.5.0/24 [170/2707456] via 10.5.0.2, 00:00:51, Ethernet2/0
D EX 10.6.4.0/24 [170/2226176] via 10.4.1.1, 00:00:24, FastEthernet0/0
R 10.5.7.0/24 [120/1] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.6.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:01:16, FastEthernet0/0
D 10.3.1.0/24 [90/460800] via 10.5.0.2, 02:18:43, Ethernet2/0
D EX 10.7.4.0/24 [170/2707456] via 10.5.0.2, 00:00:51, Ethernet2/0
D EX 10.6.5.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
R 10.5.6.0/24 [120/1] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.7.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:01:16, FastEthernet0/0
D 10.3.0.0/24 [90/284160] via 10.4.1.1, 02:35:41, FastEthernet0/0
D 10.3.0.0/16 [90/412160] via 10.4.1.1, 02:19:10, FastEthernet0/0
D EX 10.7.7.0/24 [170/2223616] via 10.5.0.2, 00:38:22, Ethernet2/0
D EX 10.6.6.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
R 10.5.5.0/24 [120/1] via 10.5.1.3, 00:00:11, Serial1/0.10
[120/1] via 10.5.1.2, 00:00:06, Serial1/0.10
D EX 10.4.4.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
D EX 10.3.3.0/24 [170/1737216] via 10.5.0.2, 02:18:43, Ethernet2/0
D EX 10.7.6.0/24 [170/2707456] via 10.5.0.2, 00:00:51, Ethernet2/0
D EX 10.6.7.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
R 10.5.4.0/24 [120/1] via 10.5.1.2, 00:00:06, Serial1/0.10
D EX 10.4.5.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
D EX 10.3.2.0/24 [170/1737216] via 10.5.0.2, 02:18:31, Ethernet2/0
D 10.7.1.0/24 [90/307200] via 10.5.0.2, 02:18:45, Ethernet2/0
D 10.6.0.0/24 [90/409600] via 10.5.0.2, 02:18:52, Ethernet2/0
R 10.5.3.0/24 [120/1] via 10.5.1.2, 00:00:06, Serial1/0.10
D EX 10.4.2.0/24 [170/2172416] via 10.4.1.1, 02:19:55, FastEthernet0/0
D EX 10.3.5.0/24 [170/1737216] via 10.5.0.2, 02:18:31, Ethernet2/0
D 10.7.0.0/24 [90/309760] via 10.4.1.1, 02:18:43, FastEthernet0/0
D 10.6.1.0/24 [90/2195456] via 10.5.0.2, 02:18:31, Ethernet2/0
R 10.5.2.0/24 [120/1] via 10.5.1.2, 00:00:06, Serial1/0.10
D EX 10.4.3.0/24 [170/2223616] via 10.5.0.2, 00:01:16, Ethernet2/0
D EX 10.3.4.0/24 [170/1737216] via 10.5.0.2, 02:18:31, Ethernet2/0
D EX 10.7.3.0/24 [170/2707456] via 10.5.0.2, 00:00:51, Ethernet2/0
D EX 10.6.2.0/24 [170/2226176] via 10.4.1.1, 00:01:16, FastEthernet0/0
C 10.5.1.0/24 is directly connected, Serial1/0.10
D 10.4.0.0/24 [90/156160] via 10.4.1.1, 02:35:41, FastEthernet0/0
D EX 10.3.7.0/24 [170/1737216] via 10.5.0.2, 02:18:31, Ethernet2/0
D EX 10.7.2.0/24 [170/2221056] via 10.5.0.2, 00:40:14, Ethernet2/0
D EX 10.6.3.0/24 [170/2226176] via 10.4.1.1, 00:01:16, FastEthernet0/0
C 10.5.0.0/24 is directly connected, Ethernet2/0
D 10.5.0.0/16 is a summary, 03:37:40, Null0
C 10.4.1.0/24 is directly connected, FastEthernet0/0
D EX 10.3.6.0/24 [170/1737216] via 10.5.0.2, 02:18:31, Ethernet2/0
R 10.5.21.0/24 [120/3] via 10.5.1.3, 00:00:11, Serial1/0.10
R 10.5.20.0/24 [120/3] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.7.17.0/24 [170/2223616] via 10.5.0.2, 00:08:48, Ethernet2/0
D EX 10.4.18.0/24 [170/2223616] via 10.5.0.2, 00:01:32, Ethernet2/0
D EX 10.7.16.0/24 [170/2223616] via 10.5.0.2, 00:34:04, Ethernet2/0
R 10.5.18.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
R 10.5.17.0/24 [120/2] via 10.5.1.3, 00:00:11, Serial1/0.10
D EX 10.4.16.0/24 [170/2223616] via 10.5.0.2, 00:00:52, Ethernet2/0
[170/2223616] via 10.4.1.1, 00:00:52, FastEthernet0/0
D EX 10.7.18.0/24 [170/2223616] via 10.5.0.2, 00:02:00, Ethernet2/0
R 10.5.16.0/24 [120/2] via 10.5.1.2, 00:00:07, Serial1/0.10
D EX 10.4.17.0/24 [170/2223616] via 10.5.0.2, 00:01:27, Ethernet2/0
D 10.7.100.0/24 [90/435200] via 10.5.0.2, 02:18:31, Ethernet2/0R2
더보기
더보기
R4 sh run
Building configuration...
Current configuration : 1891 bytes
!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
!
!
voice dsp waitstate 0
!
!
!
!
!
!
!
!
!
!
!
!
!
memory-size iomem 0
archive
log config
hidekeys
!
!
!
!
!
ip tcp synwait-time 5
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex half
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.10 point-to-point
ip address 10.5.1.2 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 210
!
interface Serial1/0.20 point-to-point
ip address 10.5.5.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 23
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
interface Ethernet2/0
ip address 10.5.2.1 255.255.255.0
duplex half
!
interface Ethernet2/1
ip address 10.5.3.1 255.255.255.0
duplex half
!
interface Ethernet2/2
ip address 10.5.4.1 255.255.255.0
duplex half
!
interface Ethernet2/3
no ip address
shutdown
duplex half
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
no cdp log mismatch duplex
!
!
!
!
!
!
!
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line vty 0 4
login
!
end
R2 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 21 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial1/0.10 2 2
Serial1/0.20 2 2
Ethernet2/0 2 2
Ethernet2/1 2 2
Ethernet2/2 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.5.2 120 00:00:08
10.5.4.2 120 00:00:45
10.5.3.2 120 00:00:28
10.5.2.2 120 00:00:24
10.5.1.1 120 00:00:10
Distance: (default is 120)
R2 sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 88 subnets, 2 masks
R 10.7.13.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.15.0/24 [120/1] via 10.5.3.2, 00:00:28, Ethernet2/1
[120/1] via 10.5.2.2, 00:00:24, Ethernet2/0
R 10.4.14.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.9.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.12.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.13.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.14.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.15.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.8.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.15.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.13.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.12.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.11.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.14.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.12.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.13.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.10.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.9.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.8.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.11.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.10.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.13.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.8.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.9.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.10.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.11.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.12.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.11.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.10.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.9.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.8.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.10.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.8.0/24 [120/1] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.9.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.5.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.4.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.7.0/24 [120/1] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.6.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.1.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.4.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.5.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.6.0/24 [120/1] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.7.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.0.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.0.0/16 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.7.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.6.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
C 10.5.5.0/24 is directly connected, Serial1/0.20
R 10.4.4.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.3.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.6.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.7.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
C 10.5.4.0/24 is directly connected, Ethernet2/2
R 10.4.5.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.2.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.7.1.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.0.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
C 10.5.3.0/24 is directly connected, Ethernet2/1
R 10.4.2.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.3.5.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.7.0.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.1.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
C 10.5.2.0/24 is directly connected, Ethernet2/0
R 10.4.3.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.3.4.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.7.3.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.2.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
C 10.5.1.0/24 is directly connected, Serial1/0.10
R 10.4.0.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.3.7.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.7.2.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.6.3.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.0.0/24 [120/1] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.5.0.0/16 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.4.1.0/24 [120/1] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.3.6.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.5.21.0/24 [120/3] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.5.20.0/24 [120/3] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.7.17.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.4.18.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.7.16.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.18.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.5.17.0/24 [120/2] via 10.5.5.2, 00:00:08, Serial1/0.20
R 10.4.16.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.7.18.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10
R 10.5.16.0/24 [120/1] via 10.5.4.2, 00:00:45, Ethernet2/2
[120/1] via 10.5.3.2, 00:00:29, Ethernet2/1
R 10.4.17.0/24 [120/5] via 10.5.1.1, 00:00:11, Serial1/0.10
R 10.7.100.0/24 [120/5] via 10.5.1.1, 00:00:10, Serial1/0.10R3
더보기
더보기
R5 sh run
Building configuration...
Current configuration : 2013 bytes
!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
!
!
voice dsp waitstate 0
!
!
!
!
!
!
!
!
!
!
!
!
!
memory-size iomem 0
archive
log config
hidekeys
!
!
!
!
!
ip tcp synwait-time 5
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex half
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.10 point-to-point
ip address 10.5.1.3 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 310
!
interface Serial1/0.20 point-to-point
ip address 10.5.5.2 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 32
!
interface Serial1/0.30 point-to-point
ip address 10.5.6.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 34
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
interface Ethernet2/0
ip address 10.5.7.1 255.255.255.0
duplex half
!
interface Ethernet2/1
ip address 10.5.8.1 255.255.255.0
duplex half
!
interface Ethernet2/2
no ip address
shutdown
duplex half
!
interface Ethernet2/3
no ip address
shutdown
duplex half
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
no cdp log mismatch duplex
!
!
!
!
!
!
!
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line vty 0 4
login
!
end
R3 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 16 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial1/0.10 2 2
Serial1/0.20 2 2
Serial1/0.30 2 2
Ethernet2/0 2 2
Ethernet2/1 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.8.2 120 00:00:18
10.5.7.2 120 00:00:07
10.5.6.2 120 00:00:04
10.5.5.1 120 00:00:23
10.5.1.1 120 00:00:13
Distance: (default is 120)
R3 sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 88 subnets, 2 masks
R 10.7.13.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.15.0/24 [120/2] via 10.5.5.1, 00:00:23, Serial1/0.20
R 10.4.14.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.9.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.12.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.13.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.14.0/24 [120/1] via 10.5.6.2, 00:00:04, Serial1/0.30
R 10.4.15.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.8.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.15.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.13.0/24 [120/1] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.4.12.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.11.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.14.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.12.0/24 [120/1] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.4.13.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.10.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.9.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.8.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.11.0/24 [120/1] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.4.10.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.13.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.8.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.9.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.10.0/24 [120/1] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.4.11.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.12.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.11.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.10.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.9.0/24 [120/1] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.4.8.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.10.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
C 10.5.8.0/24 is directly connected, Ethernet2/1
R 10.4.9.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.5.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.4.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
C 10.5.7.0/24 is directly connected, Ethernet2/0
R 10.4.6.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.1.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.4.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.5.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
C 10.5.6.0/24 is directly connected, Serial1/0.30
R 10.4.7.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.0.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.0.0/16 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.7.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.6.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
C 10.5.5.0/24 is directly connected, Serial1/0.20
R 10.4.4.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.3.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.6.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.7.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.4.0/24 [120/1] via 10.5.5.1, 00:00:24, Serial1/0.20
R 10.4.5.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.2.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.1.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.0.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.3.0/24 [120/1] via 10.5.5.1, 00:00:24, Serial1/0.20
R 10.4.2.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.5.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.0.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.1.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.2.0/24 [120/1] via 10.5.5.1, 00:00:24, Serial1/0.20
R 10.4.3.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.3.4.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.3.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.2.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
C 10.5.1.0/24 is directly connected, Serial1/0.10
R 10.4.0.0/24 [120/5] via 10.5.1.1, 00:00:14, Serial1/0.10
R 10.3.7.0/24 [120/5] via 10.5.1.1, 00:00:14, Serial1/0.10
R 10.7.2.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.6.3.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.0.0/24 [120/1] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.0.0/16 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.4.1.0/24 [120/1] via 10.5.1.1, 00:00:14, Serial1/0.10
R 10.3.6.0/24 [120/5] via 10.5.1.1, 00:00:14, Serial1/0.10
R 10.5.21.0/24 [120/2] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.5.20.0/24 [120/2] via 10.5.6.2, 00:00:05, Serial1/0.30
R 10.7.17.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.4.18.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.7.16.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.18.0/24 [120/1] via 10.5.7.2, 00:00:07, Ethernet2/0
R 10.5.17.0/24 [120/1] via 10.5.8.2, 00:00:18, Ethernet2/1
[120/1] via 10.5.7.2, 00:00:07, Ethernet2/0
R 10.4.16.0/24 [120/5] via 10.5.1.1, 00:00:14, Serial1/0.10
R 10.7.18.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10
R 10.5.16.0/24 [120/2] via 10.5.5.1, 00:00:24, Serial1/0.20
R 10.4.17.0/24 [120/5] via 10.5.1.1, 00:00:14, Serial1/0.10
R 10.7.100.0/24 [120/5] via 10.5.1.1, 00:00:13, Serial1/0.10R4
더보기
더보기
R6 sh run
Building configuration...
Current configuration : 2440 bytes
!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R4
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
!
!
voice dsp waitstate 0
!
!
!
!
!
!
!
!
!
!
!
!
!
memory-size iomem 0
archive
log config
hidekeys
!
!
!
!
!
ip tcp synwait-time 5
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex half
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.10 point-to-point
ip address 10.5.6.2 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 43
!
interface Serial1/1
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/1.10 point-to-point
ip address 10.5.11.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 46
!
interface Serial1/1.20 point-to-point
ip address 10.5.12.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 47
!
interface Serial1/1.30 point-to-point
ip address 10.5.13.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 48
!
interface Serial1/1.40 point-to-point
ip address 10.5.14.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 49
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
interface Ethernet2/0
no ip address
duplex half
!
interface Ethernet2/0.10
encapsulation dot1Q 30
ip address 10.5.9.1 255.255.255.0
!
interface Ethernet2/0.20
encapsulation dot1Q 40
ip address 10.5.10.1 255.255.255.0
!
interface Ethernet2/1
no ip address
shutdown
duplex half
!
interface Ethernet2/2
no ip address
shutdown
duplex half
!
interface Ethernet2/3
no ip address
shutdown
duplex half
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
no cdp log mismatch duplex
!
!
!
!
!
!
!
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line vty 0 4
login
!
end
R4 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 24 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial1/0.10 2 2
Serial1/1.10 2 2
Serial1/1.20 2 2
Serial1/1.30 2 2
Serial1/1.40 2 2
Ethernet2/0.10 2 2
Ethernet2/0.20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.13.2 120 00:00:19
10.5.12.2 120 00:00:13
10.5.11.2 120 00:00:14
10.5.6.1 120 00:00:15
Distance: (default is 120)
R4 sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 88 subnets, 2 masks
R 10.7.13.0/24 [120/6] via 10.5.6.1, 00:00:15, Serial1/0.10
R 10.5.15.0/24 [120/3] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.14.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.9.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.12.0/24 [120/6] via 10.5.6.1, 00:00:15, Serial1/0.10
R 10.6.13.0/24 [120/6] via 10.5.6.1, 00:00:15, Serial1/0.10
C 10.5.14.0/24 is directly connected, Serial1/1.40
R 10.4.15.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.8.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.15.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
C 10.5.13.0/24 is directly connected, Serial1/1.30
R 10.4.12.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.11.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.14.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
C 10.5.12.0/24 is directly connected, Serial1/1.20
R 10.4.13.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.10.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.9.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.8.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
C 10.5.11.0/24 is directly connected, Serial1/1.10
R 10.4.10.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.13.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.8.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.9.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
C 10.5.10.0/24 is directly connected, Ethernet2/0.20
R 10.4.11.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.12.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.11.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.10.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
C 10.5.9.0/24 is directly connected, Ethernet2/0.10
R 10.4.8.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.10.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.8.0/24 [120/1] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.9.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.5.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.4.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.7.0/24 [120/1] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.6.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.1.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.4.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.5.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
C 10.5.6.0/24 is directly connected, Serial1/0.10
R 10.4.7.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.0.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.0.0/16 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.7.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.6.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.5.0/24 [120/1] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.4.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.3.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.6.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.7.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.4.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.5.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.2.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.1.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.0.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.3.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.2.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.5.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.0.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.1.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.2.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.3.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.4.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.3.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.2.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.1.0/24 [120/1] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.0.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.7.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.2.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.6.3.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.0.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.0.0/16 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.1.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.3.6.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.21.0/24 [120/1] via 10.5.13.2, 00:00:20, Serial1/1.30
[120/1] via 10.5.12.2, 00:00:14, Serial1/1.20
R 10.5.20.0/24 [120/1] via 10.5.13.2, 00:00:20, Serial1/1.30
[120/1] via 10.5.12.2, 00:00:14, Serial1/1.20
[120/1] via 10.5.11.2, 00:00:14, Serial1/1.10
R 10.7.17.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.18.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.16.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.18.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.17.0/24 [120/2] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.16.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.18.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.5.16.0/24 [120/3] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.4.17.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
R 10.7.100.0/24 [120/6] via 10.5.6.1, 00:00:16, Serial1/0.10
ESW1
더보기
더보기
ESW1 sh run
Building configuration...
Current configuration : 2749 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
ip address 10.5.2.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.15.1 255.255.255.0
standby 1 ip 10.5.15.254
standby 1 priority 105
standby 1 preempt delay minimum 30
standby 1 track FastEthernet0/0
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW1 sh glbp bri
ESW1 sh glbp
ESW1 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 12 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Vlan10 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.15.2 120 00:00:09
10.5.2.1 120 00:00:30
Distance: (default is 120)
ESW2
더보기
더보기
ESW2 sh run
Building configuration...
Current configuration : 3016 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
ip address 10.5.3.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.15.2 255.255.255.0
standby 1 ip 10.5.15.254
standby 1 preempt
standby 1 track FastEthernet0/0
!
interface Vlan20
ip address 10.5.16.1 255.255.255.0
standby 2 ip 10.5.16.254
standby 2 preempt
standby 2 track FastEthernet0/0
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
mac-address-table static c406.0f80.0000 interface FastEthernet1/1 vlan 10
mac-address-table static c406.0f80.0000 interface FastEthernet1/2 vlan 20
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW2 sh glbp bri
ESW2 sh glbp
ESW2 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 4 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Vlan10 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.15.1 120 00:00:33
10.5.3.1 120 00:00:32
10.5.16.2 120 00:00:23
Distance: (default is 120)
ESW3
더보기
더보기
ESW3 sh run
Building configuration...
Current configuration : 2749 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW3
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
ip address 10.5.4.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/2
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
shutdown
!
interface Vlan20
ip address 10.5.16.2 255.255.255.0
standby 2 ip 10.5.16.254
standby 2 priority 105
standby 2 preempt delay minimum 30
standby 2 track FastEthernet0/0
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW3 sh glbp bri
ESW3 sh glbp
ESW3 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 21 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.4.1 120 00:00:17
10.5.16.1 120 00:00:04
Distance: (default is 120)
ESW4
더보기
더보기
ESW4 sh run
Building configuration...
Current configuration : 3121 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW4
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
track 1 interface FastEthernet0/0 line-protocol
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
ip address 10.5.7.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/3
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/6
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.17.1 255.255.255.0
vrrp 1 ip 10.5.17.254
vrrp 1 preempt delay minimum 30
vrrp 1 priority 105
vrrp 1 track 1
!
interface Vlan20
ip address 10.5.18.1 255.255.255.0
vrrp 2 ip 10.5.18.254
vrrp 2 track 1
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
mac-address-table static c408.36d0.0000 interface FastEthernet1/1 vlan 10
mac-address-table static c408.36d0.0000 interface FastEthernet1/2 vlan 20
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW4 sh glbp bri
Interface Grp Pri Time Own Pre State Master addr Group addr
Vl10 1 105 3589 Y Master 10.5.17.1 10.5.17.254
Vl20 2 100 3609 Y Master 10.5.18.1 10.5.18.254 ESW4 sh glbp
Vlan10 - Group 1
State is Master
Virtual IP address is 10.5.17.254
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 1.000 sec
Preemption enabled, delay min 30 secs
Priority is 105
Track object 1 state Up decrement 10
Master Router is 10.5.17.1 (local), priority is 105
Master Advertisement interval is 1.000 sec
Master Down interval is 3.589 sec
Vlan20 - Group 2
State is Master
Virtual IP address is 10.5.18.254
Virtual MAC address is 0000.5e00.0102
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 100
Track object 1 state Up decrement 10
Master Router is 10.5.18.1 (local), priority is 100
Master Advertisement interval is 1.000 sec
Master Down interval is 3.609 sec
ESW4 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 17 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Vlan10 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.7.1 120 00:00:05
10.5.17.2 120 00:00:13
Distance: (default is 120)
ESW5
더보기
더보기
ESW5 sh run
Building configuration...
Current configuration : 2859 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW5
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
track 1 interface FastEthernet0/0 line-protocol
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
ip address 10.5.8.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex ful
*Mar 1 03:28:17.555: %VRRP-6-STATECHANGE: Vl10 Grp 1 state Backup -> Masterl
speed 100
!
interface FastEthernet1/2
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.17.2 255.255.255.0
vrrp 1 ip 10.5.17.254
vrrp 1 track 1
!
interface Vlan20
*Mar 1 03:28:20.263: %VRRP-6-STATECHANGE: Vl10 Grp 1 state Master -> Backup
ip address 10.5.18.2 255.255.255.0
vrrp 2 ip 10.5.18.254
vrrp 2 priority 105
vrrp 2 track 1
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW5 sh glbp bri
Interface Grp Pri Time Own Pre State Master addr Group addr
Vl10 1 100 3609 Y Backup 10.5.17.1 10.5.17.254
Vl20 2 105 3589 Y Init 0.0.0.0 10.5.18.254 ESW5 sh glbp
Vlan10 - Group 1
State is Backup
Virtual IP address is 10.5.17.254
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 100
Track object 1 state Up decrement 10
Master Router is 10.5.17.1, priority is 105
Master Advertisement interval is 1.000 sec
Master Down interval is 3.609 sec (expires in 2.761 sec)
Vlan20 - Group 2
State is Init
Virtual IP address is 10.5.18.254
Virtual MAC address is 0000.5e00.0102
Advertisement interval is 1.000 sec
Preemption enabled
Priority is 105
Track object 1 state Up decrement 10
Master Router is unknown, priority is unknown
Master Advertisement interval is unknown
Master Down interval is unknown
ESW5 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 28 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Vlan10 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.8.1 120 00:00:14
10.5.17.1 120 00:00:28
Distance: (default is 120)
ESW6
더보기
더보기
ESW6 sh run
Building configuration...
Current configuration : 3165 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW6
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
track 1 interface FastEthernet0/0 line-protocol
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Serial2/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial2/0.10 point-to-point
ip address 10.5.11.2 255.255.255.0
frame-relay interface-dlci 64
!
interface Serial2/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.20.1 255.255.255.0
glbp 1 ip 10.5.20.254
glbp 1 priority 105
glbp 1 preempt
glbp 1 weighting track 1
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW6 sh glbp bri
Interface Grp Fwd Pri State Address Active router Standby router
Vl10 1 - 105 Active 10.5.20.254 local 10.5.20.2
Vl10 1 1 - Active 0007.b400.0101 local -
Vl10 1 2 - Listen 0007.b400.0102 10.5.20.2 -
Vl10 1 3 - Listen 0007.b400.0103 10.5.20.3 -ESW6 sh glbp
Vlan10 - Group 1
State is Active
2 state changes, last state change 02:01:13
Virtual IP address is 10.5.20.254
Hello time 3 sec, hold time 10 sec
Next hello sent in 1.772 secs
Redirect time 600 sec, forwarder time-out 14400 sec
Preemption enabled, min delay 0 sec
Active is local
Standby is 10.5.20.2, priority 103 (expires in 7.664 sec)
Priority 105 (configured)
Weighting 90 (default 100), thresholds: lower 1, upper 100
Track object 1 state Down decrement 10
Load balancing: round-robin
Group members:
c40a.01e4.0000 (10.5.20.1) local
c40b.484c.0000 (10.5.20.2)
c40c.4884.0000 (10.5.20.3)
There are 3 forwarders (1 active)
Forwarder 1
State is Active
1 state change, last state change 02:01:03
MAC address is 0007.b400.0101 (default)
Owner ID is c40a.01e4.0000
Redirection enabled
Preemption enabled, min delay 30 sec
Active is local, weighting 90
Forwarder 2
State is Listen
MAC address is 0007.b400.0102 (learnt)
Owner ID is c40b.484c.0000
Redirection enabled, 598.728 sec remaining (maximum 600 sec)
Time to live: 14398.728 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.20.2 (primary), weighting 90 (expires in 8.724 sec)
Forwarder 3
State is Listen
MAC address is 0007.b400.0103 (learnt)
Owner ID is c40c.4884.0000
Redirection enabled, 597.960 sec remaining (maximum 600 sec)
Time to live: 14397.956 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.20.3 (primary), weighting 90 (expires in 7.956 sec)ESW6 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 20 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial2/0.10 2 2
Vlan10 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.11.1 120 00:00:15
10.5.20.3 120 00:00:23
10.5.20.2 120 00:00:27
Distance: (default is 120)
ESW7
더보기
더보기
ESW7 sh run
Building configuration...
Current configuration : 3312 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW7
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
track 1 interface FastEthernet0/0 line-protocol
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Serial2/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial2/0.10 point-to-point
ip address 10.5.12.2 255.255.255.0
frame-relay interface-dlci 74
!
interface Serial2/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.20.2 255.255.255.0
glbp 1 ip 10.5.20.254
glbp 1 priority 103
glbp 1 preempt
glbp 1 weighting track 1
!
interface Vlan20
ip address 10.5.21.1 255.255.255.0
glbp 2 ip 10.5.21.254
glbp 2 preempt
glbp 2 weighting track 1
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW7 sh glbp bri
Interface Grp Fwd Pri State Address Active router Standby router
Vl10 1 - 103 Standby 10.5.20.254 10.5.20.1 local
Vl10 1 1 - Listen 0007.b400.0101 10.5.20.1 -
Vl10 1 2 - Active 0007.b400.0102 local -
Vl10 1 3 - Listen 0007.b400.0103 10.5.20.3 -
Vl20 2 - 100 Listen 10.5.21.254 10.5.21.3 10.5.21.2
Vl20 2 1 - Active 0007.b400.0201 local -
Vl20 2 2 - Listen 0007.b400.0202 10.5.21.2 -
Vl20 2 3 - Listen 0007.b400.0203 10.5.21.3 -ESW7 sh glbp
Vlan10 - Group 1
State is Standby
1 state change, last state change 00:57:26
Virtual IP address is 10.5.20.254
Hello time 3 sec, hold time 10 sec
Next hello sent in 1.220 secs
Redirect time 600 sec, forwarder time-out 14400 sec
Preemption enabled, min delay 0 sec
Active is 10.5.20.1, priority 105 (expires in 9.880 sec)
Standby is local
Priority 103 (configured)
Weighting 90 (default 100), thresholds: lower 1, upper 100
Track object 1 state Down decrement 10
Load balancing: round-robin
Group members:
c40a.01e4.0000 (10.5.20.1)
c40b.484c.0000 (10.5.20.2) local
c40c.4884.0000 (10.5.20.3)
There are 3 forwarders (1 active)
Forwarder 1
State is Listen
MAC address is 0007.b400.0101 (learnt)
Owner ID is c40a.01e4.0000
Time to live: 14399.880 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.20.1 (primary), weighting 90 (expires in 9.880 sec)
Forwarder 2
State is Active
1 state change, last state change 00:57:35
MAC address is 0007.b400.0102 (default)
Owner ID is c40b.484c.0000
Preemption enabled, min delay 30 sec
Active is local, weighting 90
Forwarder 3
State is Listen
MAC address is 0007.b400.0103 (learnt)
Owner ID is c40c.4884.0000
Time to live: 14398.540 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.20.3 (primary), weighting 90 (expires in 8.536 sec)
Vlan20 - Group 2
State is Listen
5 state changes, last state change 00:52:51
Virtual IP address is 10.5.21.254
Hello time 3 sec, hold time 10 sec
Next hello sent in 2.280 secs
Redirect time 600 sec, forwarder time-out 14400 sec
Preemption enabled, min delay 0 sec
Active is 10.5.21.3, priority 105 (expires in 9.096 sec)
Standby is 10.5.21.2, priority 103 (expires in 9.264 sec)
Priority 100 (default)
Weighting 90 (default 100), thresholds: lower 1, upper 100
Track object 1 state Down decrement 10
Load balancing: round-robin
Group members:
c40b.484c.0000 (10.5.21.1) local
c40c.4884.0000 (10.5.21.2)
c40d.4804.0000 (10.5.21.3)
There are 3 forwarders (1 active)
Forwarder 1
State is Active
1 state change, last state change 00:56:29
MAC address is 0007.b400.0201 (default)
Owner ID is c40b.484c.0000
Preemption enabled, min delay 30 sec
Active is local, weighting 90
Forwarder 2
State is Listen
MAC address is 0007.b400.0202 (learnt)
Owner ID is c40c.4884.0000
Time to live: 14397.312 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.21.2 (primary), weighting 90 (expires in 7.312 sec)
Forwarder 3
State is Listen
MAC address is 0007.b400.0203 (learnt)
Owner ID is c40d.4804.0000
Time to live: 14397.136 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.21.3 (primary), weighting 90 (expires in 8.244 sec)ESW7 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 21 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial2/0.10 2 2
Vlan10 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.12.1 120 00:00:18
10.5.21.2 120 00:00:26
10.5.20.3 120 00:00:15
10.5.21.3 120 00:00:01
10.5.20.1 120 00:00:06
Distance: (default is 120)
ESW8
더보기
더보기
ESW8 sh run
Building configuration...
Current configuration : 3312 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW8
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
track 1 interface FastEthernet0/0 line-protocol
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Serial2/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial2/0.10 point-to-point
ip address 10.5.13.2 255.255.255.0
frame-relay interface-dlci 84
!
interface Serial2/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
ip address 10.5.20.3 255.255.255.0
glbp 1 ip 10.5.20.254
glbp 1 preempt
glbp 1 weighting track 1
!
interface Vlan20
ip address 10.5.21.2 255.255.255.0
glbp 2 ip 10.5.21.254
glbp 2 priority 103
glbp 2 preempt
glbp 2 weighting track 1
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW8 sh glbp bri
Interface Grp Fwd Pri State Address Active router Standby router
Vl10 1 - 100 Listen 10.5.20.254 10.5.20.1 10.5.20.2
Vl10 1 1 - Listen 0007.b400.0101 10.5.20.1 -
Vl10 1 2 - Listen 0007.b400.0102 10.5.20.2 -
Vl10 1 3 - Active 0007.b400.0103 local -
Vl20 2 - 103 Standby 10.5.21.254 10.5.21.3 local
Vl20 2 1 - Listen 0007.b400.0201 10.5.21.1 -
Vl20 2 2 - Active 0007.b400.0202 local -
Vl20 2 3 - Listen 0007.b400.0203 10.5.21.3 -ESW8 sh glbp
Vlan10 - Group 1
State is Listen
Virtual IP address is 10.5.20.254
Hello time 3 sec, hold time 10 sec
Next hello sent in 1.960 secs
Redirect time 600 sec, forwarder time-out 14400 sec
Preemption enabled, min delay 0 sec
Active is 10.5.20.1, priority 105 (expires in 4.520 sec)
Standby is 10.5.20.2, priority 103 (expires in 9.168 sec)
Priority 100 (default)
Weighting 90 (default 100), thresholds: lower 1, upper 100
Track object 1 state Down decrement 10
Load balancing: round-robin
Group members:
c40a.01e4.0000 (10.5.20.1)
c40b.484c.0000 (10.5.20.2)
c40c.4884.0000 (10.5.20.3) local
There are 3 forwarders (1 active)
Forwarder 1
State is Listen
MAC address is 0007.b400.0101 (learnt)
Owner ID is c40a.01e4.0000
Time to live: 14394.520 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.20.1 (primary), weighting 90 (expires in 4.520 sec)
Forwarder 2
State is Listen
MAC address is 0007.b400.0102 (learnt)
Owner ID is c40b.484c.0000
Time to live: 14397.240 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.20.2 (primary), weighting 90 (expires in 7.236 sec)
Forwarder 3
State is Active
1 state change, last state change 00:55:56
MAC address is 0007.b400.0103 (default)
Owner ID is c40c.4884.0000
Preemption enabled, min delay 30 sec
Active is local, weighting 90
Vlan20 - Group 2
State is Standby
3 state changes, last state change 00:52:56
Virtual IP address is 10.5.21.254
Hello time 3 sec, hold time 10 sec
Next hello sent in 0.776 secs
Redirect time 600 sec, forwarder time-out 14400 sec
Preemption enabled, min delay 0 sec
Active is 10.5.21.3, priority 105 (expires in 7.716 sec)
Standby is local
Priority 103 (configured)
Weighting 90 (default 100), thresholds: lower 1, upper 100
Track object 1 state Down decrement 10
Load balancing: round-robin
Group members:
c40b.484c.0000 (10.5.21.1)
c40c.4884.0000 (10.5.21.2) local
c40d.4804.0000 (10.5.21.3)
There are 3 forwarders (1 active)
Forwarder 1
State is Listen
MAC address is 0007.b400.0201 (learnt)
Owner ID is c40b.484c.0000
Time to live: 14395.312 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.21.1 (primary), weighting 90 (expires in 5.308 sec)
Forwarder 2
State is Active
1 state change, last state change 00:55:07
MAC address is 0007.b400.0202 (default)
Owner ID is c40c.4884.0000
Preemption enabled, min delay 30 sec
Active is local, weighting 90
Forwarder 3
State is Listen
MAC address is 0007.b400.0203 (learnt)
Owner ID is c40d.4804.0000
Time to live: 14398.848 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.21.3 (primary), weighting 90 (expires in 8.844 sec)ESW8 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 19 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial2/0.10 2 2
Vlan10 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.13.1 120 00:00:18
10.5.20.2 120 00:00:00
10.5.21.3 120 00:00:20
10.5.20.1 120 00:00:24
10.5.21.1 120 00:00:27
Distance: (default is 120)
ESW9
더보기
더보기
ESW9 sh run
Building configuration...
Current configuration : 3131 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW9
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
track 1 interface FastEthernet0/0 line-protocol
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 20
duplex full
speed
*Mar 1 02:57:11.803: %GLBP-6-FWDSTATECHANGE: Vlan20 Grp 2 Fwd 1 state Listen -> Active
*Mar 1 02:57:14.387: %GLBP-6-FWDSTATECHANGE: Vlan20 Grp 2 Fwd 2 state Listen -> Active 100
!
interface FastEthernet1/2
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
duplex full
speed 100
!
interface FastEthernet1/5
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Serial2/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial2/0.10 point-to-point
ip address 10.5.14.2 255.255.255.0
!
interface Serial2/1
no ip
*Mar 1 02:57:15.971: %GLBP-6-FWDSTATECHANGE: Vlan20 Grp 2 Fwd 1 state Active -> Listenaddress
shutdown
serial restart-delay 0
!
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
!
interface Vlan1
no ip address
shutdown
!
interface Vlan20
ip address 10.5.21.3 255.255.255.0
glbp 2 ip 10.5.21.254
glbp 2 priority 105
glbp 2 preempt
glbp 2 weighting track 1
!
router rip
version 2
network 10.0.0.0
no auto-summary
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vl
*Mar 1 02:57:18.635: %GLBP-6-FWDSTATECHANGE: Vlan20 Grp 2 Fwd 2 state Active -> Listenan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW9 sh glbp bri
Interface Grp Fwd Pri State Address Active router Standby router
Vl20 2 - 105 Active 10.5.21.254 local 10.5.21.2
Vl20 2 1 - Listen 0007.b400.0201 10.5.21.1 -
Vl20 2 2 - Listen 0007.b400.0202 10.5.21.2 -
Vl20 2 3 - Active 0007.b400.0203 local -ESW9 sh glbp
Vlan20 - Group 2
State is Active
1 state change, last state change 00:53:27
Virtual IP address is 10.5.21.254
Hello time 3 sec, hold time 10 sec
Next hello sent in 0.460 secs
Redirect time 600 sec, forwarder time-out 14400 sec
Preemption enabled, min delay 0 sec
Active is local
Standby is 10.5.21.2, priority 103 (expires in 6.220 sec)
Priority 105 (configured)
Weighting 90 (default 100), thresholds: lower 1, upper 100
Track object 1 state Down decrement 10
Load balancing: round-robin
Group members:
c40b.484c.0000 (10.5.21.1)
c40c.4884.0000 (10.5.21.2)
c40d.4804.0000 (10.5.21.3) local
There are 3 forwarders (1 active)
Forwarder 1
State is Listen
2 state changes, last state change 00:00:06
MAC address is 0007.b400.0201 (learnt)
Owner ID is c40b.484c.0000
Redirection enabled, 593.556 sec remaining (maximum 600 sec)
Time to live: 14393.556 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.21.1 (primary), weighting 90 (expires in 8.632 sec)
Forwarder 2
State is Listen
2 state changes, last state change 00:00:05
MAC address is 0007.b400.0202 (learnt)
Owner ID is c40c.4884.0000
Redirection enabled, 594.284 sec remaining (maximum 600 sec)
Time to live: 14394.284 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.5.21.2 (primary), weighting 90 (expires in 4.280 sec)
Arp replies sent: 1
Forwarder 3
State is Active
1 state change, last state change 00:53:21
MAC address is 0007.b400.0203 (default)
Owner ID is c40d.4804.0000
Redirection enabled
Preemption enabled, min delay 30 sec
Active is local, weighting 90ESW9 sh ip pro
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 20 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial2/0.10 2 2
Vlan20 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.5.21.2 120 00:00:42
10.5.21.1 120 00:00:49
Distance: (default is 120)
ESW10
더보기
더보기
R16 sh run
Building configuration...
Current configuration : 2714 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW10
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip routing
no ip icmp rate-limit unreachable
no ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/3
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/4
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/5
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/6
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW11
더보기
더보기
R17 sh run
Building configuration...
Current configuration : 2714 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW11
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip routing
no ip icmp rate-limit unreachable
no ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/3
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/4
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/5
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/6
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW12
더보기
더보기
R18 sh run
Building configuration...
Current configuration : 2822 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW12
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip routing
no ip icmp rate-limit unreachable
no ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/2
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/3
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/4
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/5
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/6
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/7
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/8
switchport access vlan 10
duplex full
speed 100
!
interface FastEthernet1/9
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/10
switchport access vlan 20
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW13
더보기
더보기
R19 sh run
Building configuration...
Current configuration : 2629 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW13
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip routing
no ip icmp rate-limit unreachable
no ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
duplex full
speed 100
!
interface FastEthernet1/2
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
switchport access vlan 30
duplex full
speed 100
!
interface FastEthernet1/5
switchport access vlan 40
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
ESW14
더보기
더보기
R20 sh run
Building configuration...
Current configuration : 2652 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname ESW14
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip routing
no ip icmp rate-limit unreachable
no ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp file nvram:vlan.dat
!
!
ip tcp synwait-time 5
!
!
!
!
!
interface FastEthernet0/0
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
description *** Unused for Layer2 EtherSwitch ***
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
duplex full
speed 100
!
interface FastEthernet1/1
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet1/2
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet1/3
duplex full
speed 100
!
interface FastEthernet1/4
switchport access vlan 30
duplex full
speed 100
!
interface FastEthernet1/5
switchport access vlan 40
duplex full
speed 100
!
interface FastEthernet1/6
duplex full
speed 100
!
interface FastEthernet1/7
duplex full
speed 100
!
interface FastEthernet1/8
duplex full
speed 100
!
interface FastEthernet1/9
duplex full
speed 100
!
interface FastEthernet1/10
duplex full
speed 100
!
interface FastEthernet1/11
duplex full
speed 100
!
interface FastEthernet1/12
duplex full
speed 100
!
interface FastEthernet1/13
duplex full
speed 100
!
interface FastEthernet1/14
duplex full
speed 100
!
interface FastEthernet1/15
duplex full
speed 100
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
banner exec ^C
***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex
To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config
To view existing vlans use the command "show vlan-switch brief"
Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************
^C
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
!
end
'네트워크 및 서버 > 네트워크' 카테고리의 다른 글
| Link State Protocol 정리 (0) | 2024.10.28 |
|---|---|
| Distanse Vactor Protocol 정리 (0) | 2024.10.28 |
| GLBP 심화 실습 / GLBP 패킷 (0) | 2024.10.19 |
| GLBP (0) | 2024.10.18 |
| GLBP 실습 (0) | 2024.10.18 |
